Starting at : $0 US*
*All black

  • Model # : EP00075
  • Hopper capacity : 60 lb (27 kg)
  • Baffle type : Stainless steel
  • Optimum efficiency : 77.2 %
  • May qualify for some government incentives.
  • Average particulate emissions rate : 2.9 g/h
  • Approved for a mobile home installation
  • Approved for a mobile home installation
  • Recommended heating area-ft² : 500 - 2,200
  • Burn rate : 1.2 - 5.0 lb/h
  • Maximum burn time : 50 h
  • Tested and listed as per applicable standards : By an accredited laboratory (CAN/USA)
  • Combustion Technology : Bottom-feed
  • High-efficiency certified appliance
  • Electronic igniter
  • Thermostatic or manual mode : N.A.
  • Approved for an alcove installation
  • Glass air-wash system
  • Premium quality blower included (CFM) : 176
  • Chimney diameter 3"

  • Hopper capacity 60 lb (27 kg)

  • Baffle type Stainless steel

  • Overall dimension (Height) 33 3/8"

  • Overall dimension (Width) 21 5/8"

  • Overall dimension (Depth) 32 5/8"

  • Optimum efficiency 77.2 %

  • Average particulate emissions rate 2.9 g/h

  • Warranty Limited lifetime

  • Noise level at 6 feet 49 dBa (+/- 3 dBa) - 59 dBa (+/- 3 dBa)

  • Shipping Weight 348 lb (158 kg)

  • Maximum heat input rate 43,000 BTU/h (12.6 kW)

  • Overall heat output rate (max.) 29,300 BTU/h (8.6 kW)

  • Overall heat output rate < 6,400 BTU/h (1.9 kW)

  • Average overall efficiency (min. to max.) 75.3 %

  • Average overall efficiency (min. to max.) 69.8 %

  • Recommended heating area-ft² 500 - 2,200

  • Glass surface – dimensions (Width X Height) 9 1/2" X 9"

  • Average CO 41.2 g/h

  • Burn rate 1.2 - 5.0 lb/h

  • Combustion technology Bottom-feed

  • Maximum burn time 50 h

  • Tested and listed as per applicable standards By an accredited laboratory (CAN/USA)

  • Type of chimney ULC/ORD-C441, CAN/ULC S609, UL 641 (TYPE L)

  • Fuel type Pellet (Premium grade or better)

  • Door type Single, glass with cast iron frame

  • Glass type Ceramic glass

  • Approved for a mobile home installation Yes, with fresh air intake

  • AC Current 2.3A/120VAC - 3.5A/120VAC

  • N.A.

  • N.A.

  • 3.5A (420W)

  • 2.3A - 3.1A (276 - 372W)

  • 7.5A - 250V

  • Power cord inlet socket fuse N.A.

  • Main board battery N.A.

  • Voltage and frequency 120VAC - 60 Hz

  • Canadian Standard (emissions) CSA B415.1-10

  • USA standard (emissions) EPA

  • Canadian standard (safety) ULC S627

  • USA standard (safety) ASTM E1509, UL 1482

  • Approved for an alcove installation Yes

  • Electronic igniter Yes

  • Glass air-wash system Yes

  • High-efficiency certified appliance Yes

  • Premium quality blower included (CFM) 176

Customer reviews

The reviews you are reading come from homeowners who have bought the product and registered their warranty online. Therefore, in order to write a review, you must have purchased the product and you must register your warranty using our Warranty Registration section. Information about your product, such as its serial number, will be requested.
The reviews you are reading come from homeowners who have bought the product and registered their warranty online. Therefore, in order to write a review, you must have purchased the product and you must register your warranty using our Warranty Registration section. Information about your product, such as its serial number, will be requested.

Heating cost calculation

Select your country
What is your current annual heating cost ?
What type of combustible do you currently use ?
Can you specify the unit cost of your actual combustible ?
What is the combustible you wish to compare ?
Can you specify the unit cost of combustible to compare ?
Your annual estimated saving with
* For wood, all calculations are based on a full cord measuring 1,2 m X 1,2 m X 2,4 m (4 ft X 4 ft X 8 ft). In certain regions of Canada, we call a cord what is in fact a third of a cord: 0,4 m X 1,2 m X 2,4 m (16 in X 4 ft X 8 ft). If what you buy is a third of a cord, multiply the price by 3. For the efficiency variable, we assume in our calculations that the stove used is one tested according to the EPA or CSA B415.1 standards.
Terms and conditions

Terms and Conditions

1. This calculator enables you to compare your current heating system and combustible with other heating systems or combustibles. However, we deny any responsibility and offer no guarantee as to the accuracy and integrality of the data supplied.

2. The results obtained from this calculator must only serve as a guide and cannot replace the detailed calculations performed by a specialist. For a detailed evaluation of your heating costs, please consult a professional.

3. By using this calculator, you automatically agree to the conditions stated above.

4. This calculator was carefully programmed. However, some computer errors may occur. If you encounter any error, please do not hesitate to communicate with us at : marketing@sbi-international.com

 

Minimum clearances to combustibles (Data expressed in inches. 1 inch = 25.4 mm)
  Canada USA
ArrPCAi :
CotPCAi :
CoiPCAi :
DesPCAi :

Options

Fresh air intakes

AC01240 - 3"Ø X 5' FRESH AIR INTAKE KIT
AC01240
AC02092 - 3"Ø X 10' INSULATED FLEX PIPE FOR FRESH AIR INTAKE KIT
AC02092

Others

AC05558 - DIGITAL WALL THERMOSTAT
AC05558 English US

Remote controls

AC05568 - PROGRAMMABLE THERMOSTATIC REMOTE CONTROL
AC05568

Accessories

Adhesives, gaskets and insulation
HIGH TEMPERATURE RED SILICONE (300 mL- 10.1 FL.OZ.)

AC02040

HIGH TEMPERATURE RED SILICONE (300 mL- 10.1 FL.OZ.)

A premium quality 100% silicone sealant that stays permanently flexible. Suitable for sealing around oven windows, flues on gas appliances, joints and metal stacks and ductwork. An excellent gasket maker to replace existing cork and felt rubber. Ideal for holding gaskets around stove and fireplace doors. Oxygen sensor safe. Withstands continuous temperatures up to 260°C or 500°F.


HIGH TEMPERATURE CLEAR SILICONE (300 mL - 10.1 FL.OZ.)

AC02045

HIGH TEMPERATURE CLEAR SILICONE (300 mL - 10.1 FL.OZ.)

A premium quality 100% silicone sealant that stays permanently flexible. Suitable for sealing around oven windows, flues on gas appliances, joints and metal stacks and ductwork. An excellent gasket maker to replace existing cork and felt rubber. Ideal for holding gaskets around stove and fireplace doors. Oxygen sensor safe. Withstands continuous temperatures up to 204°C or 400°F.


Paint
METALLIC BLACK STOVE PAINT - 342 g (12oz) AEROSOL

AC05959

METALLIC BLACK STOVE PAINT - 342 g (12oz) AEROSOL

Lead-free paint. Easy drying. Excellent adhesion and color retention.


METALLIC BLACK STOVE PAINT - 85 g (3oz) AEROSOL

AC05963

METALLIC BLACK STOVE PAINT - 85 g (3oz) AEROSOL

Lead-free paint. Easy drying. Excellent adhesion and color retention.


Maintenance products
STOVE AND FURNACE CEMENT (300 mL - 10.1 FL.OZ.)

AC02540

STOVE AND FURNACE CEMENT (300 mL - 10.1 FL.OZ.)

Dries to seal cracks and joints to prevent smoke or air leaks. SBI Stove & Furnace Cement may be used in stoves, furnaces, boilers, fireplaces (all fuels), combustion chambers, firedoors, flue and chimney joints, brick linings, gasketing.


ASH VACUUM CLEANER

AC02582

ASH VACUUM CLEANER

Conforms to UL STD. 1017. Certified to CSA STD. C22.2 No. 243-10. Avoid ending prematurely the life of your vacuum cleaner by using the ideal tool to suck up the completely cooled ashes of your wood or pellet appliance. Designed almost exclusively for ash collection, this ash vacuum cleaner will offer several years of service with proper care. Power: 800 W.


ASH VACUUM CLEANER User guide

3'' PELLET STOVE CLEANING KIT

AC02712

3'' PELLET STOVE CLEANING KIT

Maximize the efficiency of your pellet appliance using the proper service tools! The kit includes: A stainless steel bristled brush along with a long scraper featuring a tough steel blade and an ergonomic handle. Efficiently removes the hardened buildup on the burn pot surface and holes, as well as the outlet of the pellet supply auger housing. A 3" (76 mm) diameter chimney brush (1/4"-20 thread) with flexible rods allowing cleaning up to 10 feet (3.04 m). To ease maintenance of exhaust systems with offsets. A nylon bristled tapered brush with a long steel rod and a wooden handle. Ideal for tight spaces and diameters between 1" (25 mm) and 2 1/4" (57 mm). A glass cleaner (500 mL-16.9 fl.oz.). Used regularly, it prevents permanent stains on the glass.


4'' PELLET STOVE CLEANING KIT

AC02714

4'' PELLET STOVE CLEANING KIT

Maximize the efficiency of your pellet appliance using the proper service tools! The kit includes: A stainless steel bristled brush along with a long scraper featuring a tough steel blade and an ergonomic handle. Efficiently removes the hardened buildup on the burn pot surface and holes, as well as the outlet of the pellet supply auger housing. A 4" (102 mm) diameter chimney brush (1/4"-20 thread) with flexible rods allowing cleaning up to 10 feet (3.04 m). To ease maintenance of exhaust systems with offsets. A nylon bristled tapered brush with a long steel rod and a wooden handle. Ideal for tight spaces and diameters between 1" (25 mm) and 2 1/4" (57 mm). A glass cleaner (500 mL-16.9 fl.oz.). Used regularly, it prevents permanent stains on the glass.


3" PELLET STOVE ROUND BRUSH (1/4"-20 THREAD)

AC04503

3" PELLET STOVE ROUND BRUSH (1/4"-20 THREAD)

Useful to sweep your pellet stove vent pipe.

Note: ¼"-20 thread and ¼"NPT are NOT compatible.


4" PELLET STOVE ROUND BRUSH (1/4"-20 THREAD)

AC04504

4" PELLET STOVE ROUND BRUSH (1/4"-20 THREAD)

Useful to sweep your pellet stove vent pipe.

Note: ¼"-20 thread and ¼"NPT are NOT compatible


DRY CLEANING PAD

AC07824

DRY CLEANING PAD

Easily cleans the soot from glass without water.


PELLET APPLIANCE GLASS CLEANER (500 mL - 16.9 FL.OZ.)

AC07827

PELLET APPLIANCE GLASS CLEANER (500 mL - 16.9 FL.OZ.)

Special formula recommended for glass cleaning of wood pellet-burning appliances.


Government Incentives

Government incentives

USA

Nova Scotia

Portola-USA