This improved liner diverter adapter facilitates the installation of a wood stove insert when the chimney flue is offset from the stove's flue collar.

This kit contains: 2x pipe clamps and 1x outside wall termination.

Kit contain: 1 x adapter, 2 x pipe clamps, 1 x outside wall termination and screws. Fit on Solution 1.3 by Enerzone.

Fits on Osburn 2000 model on pedestal.

Kit contains: 1 X Adapter, 2 X Pipe clamps, 1 X Outside wall termination and Screws. The screws quantity may differ depending on the kit.

Made of aluminum and heat resistant insulating wool.

Reinforced aluminized trilaminate with fiberglass insulation.

Reinforced aluminized trilaminate with fiberglass insulation.

Allows to secure the flexible liner to an insert’s flue collar from the inside of the firebox.

Length of 4 feet, 5" diameter.

Made of two plies black polyester with fiberglass insulation.

Made of two plies black polyester with fiberglass insulation.

Certified according to ULC S110/UL 181, this insulated flexible air duct is composed of four (4) layers of polyester encapsulating a galvanized wire; all assembled with a flame retardant adhesive. Fully water repellent, the duct is corrosion resistant as well as high static pressure thanks to the unique four-layer lamination process and wall thickness. The insulation contains no hazardous substances that may pose a health hazard.

Certified according to ULC S110/UL 181, this insulated flexible air duct is composed of four (4) layers of polyester encapsulating a galvanized wire; all assembled with a flame retardant adhesive. Fully water repellent, the duct is corrosion resistant as well as high static pressure thanks to the unique four-layer lamination process and wall thickness. The insulation contains no hazardous substances that may pose a health hazard.

Recommended to reduce or eliminate negative pressure problems.  Fits on models Osburn 1100, 1600, 1800, 2200 and 2400.